Custom TV cabinet with homemade oak inserts, by Susanne

Related projects
TOSIZE Furniture
New!
Check out our new shelf cabinets 3D configurator
Create DIY projects in a breeze!
Start designing right away
TOSIZE Furniture
New!
Create DIY projects in a breeze!
Logo TOSIZE.fi
Start designing

Make this furniture yourself using TOSIZE.fi

Susanne

Susanne

NL

Average

2 minutes

In this DIY project, Susanne shows that you can make custom cabinets entirely according to your wishes by adjusting and expanding them yourself. The end result is super creative, with an MDF base that can be painted in any color. The oak makes it very warm and the self-installed lighting completes this beautiful custom TV cabinet! Read below how Susanne tackled this.

Description by Susanne

This TV cabinet has a wide, deep base and a shallower top part with open and lockable compartments. A matte white finish was chosen. Three spacious drawers have been made in the left part of the base. The right part can be closed with two high doors. A solid oak top has been inlaid under the TV in the base. The peripheral equipment for the TV is stored behind the two doors under the TV. The open compartments have an oak insert. The open compartments are equipped with an LED spotlight, which highlights the warm oak wood. The various photos and memorabilia on display are also beautifully highlighted.

How I created this project

During the design brief it was already clear that the upper part should be less deep then become the chassis. We designed two 50 cm deep cabinets for the base (92 cm wide), between which an extra floor and back shelf were installed (134 cm wide). The oak leaf, 40 mm solid, will later be placed on this. A third cupboard has been designed for the upper part, 322 cm wide, 35 cm deep. We left out the floorboards of this cupboard, and the top part was placed on the base. After the paint job, the three drawers on the left were made and the cupboard doors were hung. A wooden frame was made in the middle part on which the TV was later hung. The insert cabinets are made of 18 mm solid oak. A thin slot has been milled at the top to conceal the lighting cable. Finally, the oak plank was installed and the TV was hung. The drawers and cabinet doors could not be prepared in the carpentry factory. We custom-made, marked and milled them ourselves. The oak inset cabinets are also custom-made and installed by us. This job does require some experience with woodworking.

Dimensions of my DIY project

Width: 322.0 cm
Height: 260.0 cm
Depth: 50.0 cm (base), 35.0 cm (top)

Tip! Also check out our handy DIY tips!

How next?

Would you like to make this DIY project? This furniture is from our TOSIZE Furniture line. Create your personal custom-made furniture via our 3D configurator and receive it as a simple kit.

3 634,96 €


All materials used

Explanation
Explanation
Explanation
Explanation
Explanation
Explanation

View all furniture