Close stairs with custom plywood risers, by Aldin

Related projects
TOSIZE Furniture
New!
Check out our new shelf cabinets 3D configurator
Logo TOSIZE.fi
Start designing right away

Create this project yourself with sheet material cut to size by TOSIZE.fi!

Aldin

Aldin

NL

Average

2 minutes

Aldin shows in this DIY project how he closed his open staircase. For this project he ordered custom-made plywood interior poplar so that he could start immediately. Read more about his approach and experience below.

Description of Aldin

I closed the stairs to the attic. We noticed that a lot of dust falls down and in terms of safety for children it is better. In addition, it is also more efficient for the heat. Steps I took: - Measure the stair steps in length and height. - Determine material for the risers. 12mm chosen plywood. Is sufficiently thick. 20mm is really way too thick. - Enter order and order. - Get started.

How I made this project

- First all the steps were measured in length and width.
- Ordered 12 mm thick white primed plywood, this is better than MDF. You don't have to paint it as often for a sleek result.
- Then fitted the risers
- Pre-drilled the risers with a countersink.
- Then mount the steps with wood glue on the inside and top and screw them in place.
- Filled the holes where I screwed. -
Then everything was sanded well
- Primed
-Edges sealed
Needs to be varnished.

Dimensions of my DIY project

The risers differ in size. I have two turns in the stairs, which makes it difficult. I kept the height at 17.5 cm. There is a small edge, but I don't find this disturbing. The length of the risers varies from 90 to 130cm

Tip! Also check out our handy DIY tips!

How next?

Want to make this DIY project? Check out Aldin's saw list and complete your order easily.

212,31 €


All materials used

Explanation

View all sheet materials